You may want to install hardie trim at your home or office in such a way that its quality remains as it should be. You may use a hammer to nail instead of using a nail gun at all.
But let me guarantee you that hammer could be the tool for your finger injuries. On the other hand nail gun is far safer as it is well designed and well maintained.
So a nailgun is a tool by which you can put the nails into wood or the other kind of substance like hardie trim. It is usually driven by pneumatic force, electromagnetism or flammable gases like butane or propane. So let me show you some of the best nail guns for hardie trim.
Editor’s Recommendation Top 5 Nail Gun for Hardie Trim
What is hardie trim?
As you have an eco-friendly mindset up so you will go for green architecture. How will you build your home or office ecologically sustainable? At this point, hardie trim may resolve your problem.
That’s why you have decided to use hardie trim which is made up of Portland cement, cellulose pulp, sand and water. You may think about the attachment of those hardie trim in the best manner to decorate your home. So you won’t use hammer to nail for sure.
In this case, you need a best nail guns for hardie trim which is Versatile and Powerful, Tough and Dependable. For the perfect finish at every angle nail gun can meet your demand.
So here is our list of nail guns for hardie trim review, let’s start.
Top 5 Nail Gun for Hardie Trim Review
1. PORTER-CABLE 20V MAX Cordless
This Porter-cable 20V max cordless Brad Nailer kit could be your best choice because of its handy phenomenon with battery-powered that’s why it is eliminating the need for a compressor, hose, or expensive gas cartridges.
This could be your best nailer because of its handy features. It has a well runtime.
Its depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
Its weight, not more than 5.9 pounds. It is powered by 1 lithium-ion battery (included). Voltage only 20 V.
This is a huge time saver.
- Easy to use
- Could drive 2-inch nails completely into the wood
- Easy to load
- Breeze to use
- Better Runtime
- Little expensive
- Not much handy to rough use.
2.NuMax SFR2190 Pneumatic 21 Degree
Numax SFT2190 pneumatic 21 Degree 3-1/2’’ Full round head farming nailer could be best your work partner because of lightweight and durable magnesium body, ergonomic secure handle, and replaceable trigger which allows quickfire or single shot function.
As it is run by airpower so you haven’t think twice about its batteries or recharging facilities.
Some of its users said they have put well over 1500 nails through this framing nailer without any kind of problems. You may buy this product without hesitation because it hardly jammed.
It is 8.6 pounds of weight without requires of batteries. The whole body is made up of Magnesium with heat-treated steel parts.
- Easy to carry
- Very much handy
- Can drive 3+ inch nails with ease
- May be not professional grade
3. DEWALT Brad Nailer Kit, 18GA
For a proper setting of nail heads, it has the free depth of drive adjustment. It has rear exhaust facilities that prevent contamination in the work.
Its operating pressure is only 70-120psi which is not so bad. Its power source is pneumatic so the compressor is required to run this product which is excluded.
The item weights only 5.03pounds and easy to drive. It requires very low maintenance as it doesn’t require oiling.
It’s super easy to adjust the depth the nails are driven. It is very much durable.
One of its users told that he was very confused about its quality because of such low cost. But after gives a try he finds this nailer fascinating on crown molding and wall panel installation.
- Reliable services
- Much durable
- Low maintenance cost
- Give a great work time
- Easy to adjust the power
- You may find the locking mechanism problematic sometimes.
4.Freeman P4FRFNCB Pneumatic Framing
Well, now this freeman P4FRFNCB combo kit with 4 pieces nailed can make your day. The kit includes a rugged canvas carrying bag. It is a combo pack with a framing nailer, a finish nailer, a straight brad nailer, and a narrow crown stapler.
Its weight is 6.39 pounds. It runs by air-powered thus pneumatic.
You can shot well enough with propelling operation at 90psi. You can give shot in normal wear and tear as it is very much handy in use.
The farming nailer is very useable. It uses 21 Degree nails up to 3 1/2 inches. The 3 1/4 inches nails are great in use.
You can adjust the depth of the shot you want. If you need to grip it on the surface you just remove the rubber to expose the teeth.
- No problem with the power source
- Easy to set on different depth
- Homely in use
- Easy fixing facilities
- The framing gun may be problematic with last two or three nails left in the strip
- Hard to fit in small spaces.
5. BOSTITCH Framing Nailer, Round Head
It has a pneumatic power source. This nail gun weighs only 4.17 pounds. You can handle this gun as it has a rubber grip and an integrated rubber skid pad.
It has 2 nailers in one and quick changeable nose pieces. As it is operated by airpower so the pressure will be between 80 to 120psi.
The adjustment for nail depth could be easier and more refined, but it’s workable.
One of its users said this nail gun is so far so good. In two weeks he has driven almost hundreds of the 2’’ and 3.25’’ nail without any sort of problems.
- Powerful and works great
- Great tool for large jobs
- Fantastic for frequent nailing
- Compressor cycles a bit more using this gun.
Frequently Asked Questions
What kind of nail gun do you use for Hardie board?
You may use a pneumatic coil siding nail gun for hardie board. In addition, your nails must be corrosion-resistant, galvanized or stainless steel. Moreover, electro-galvanized nails can be used in hardie board.
Can you use a nail gun on hardiplank?
Yes, you can use a nail gun on hardie plank to save your precious time by using a pneumatic coil siding nail gun. As hardie plank is much harder than wood so you can use 6d or 8d galvanized nails and install a single nail about 1inch.
How do you nail Hardie?
Just buy a pneumatic nailer or any kind of nail gun. It will save your time and keep you away from getting injuries. You can use galvanized or stainless steel nails, which should penetrate at least 1 inch into the sheet.
Can you staple Hardie board?
Yes, you can staple hardie board using 18-gauge corrosion-resistant ¾’’ staples which must be polymer-coated. For hardie backer 500 cement board use minimum 1-1/4’’ roofing nails.
Can you face nail Hardie siding?
Yes, you can expose nailer head to the elements. The head must be tight, not counter tight or overdriven.
A nail gun can save your time and if you nail hardie trim it can also save you from any kind of injuries. You can have a suitable nail gun for you which must be in the lightweight, inexpensive and best quality of course.
So now go and decorate your home or office as you want using the best quality of nail gun.